|
Equipment & Storage
Typical Applications
• Valve Shelters • Backup Generator Housings •
MCC Control Rooms • Utility Sheds • Materials Storage
• Hazardous Waste Storage with Containment Trays •
Customized Telecommunication Buildings • Television or
Radio Broadcasting Stations • Buildings to house Police
or other Emergency Service Systems.
In the world
of industry, there is always a need for customized, solidly
engineered equipment and storage buildings. No matter what
your particular need, NRB can help you protect your materials
and investment, effectively and economically. Our equipment
and storage buildings are designed and fabricated to the highest
standards in the industry, and each building can be customized
to fit your specific requirements. Value engineering plays
a large role in our analysis of your requirements, so you
buy only what you need, no more and no less - on time and
within budgets. We offer offload and setting services as well,
so it is in place quickly and with minimal disruption to your
site.
The NRB Series
2000-"E" Custom Engineered Equipment Enclosure
All our Series 2000-"E" buildings are custom-engineered
to house anything from sophisticated telecommunications equipment
on rooftops or at tower sites, to back-up generators, motor
controls, processing equipment and emergency services equipment.
These buildings have custom finishes inside and out to accommodate
the equipment within the room, and to suit your particular
exterior appearance or durability needs. The "E"
Series are typically complete with all electrical and heating,
ventilation and air-conditioning packages and can include
plumbing, sprinklers, alarm systems or any other features
you require. Floor, wall and roof loads are engineered specifically
for the local geographical design criteria as well as to accommodate
the equipment within each building.
Although generally of steel framing, wood framed "E"
Series are also available. Floor assemblies can range from
steel and plywood, to checker-plate or pre-poured concrete.
The NRB Series
2000-"DS" Custom Storage Buildings
Our Dura-Shed, or "DS" Series buildings start with
a basic economical storage building of 8' x 8' x 8' high,
and move all the way up to small warehouses with up to 14'
clear ceiling heights and 30' clear spans. Buildings are pre-assembled,
or can be split into sections for ease of transportation.
They are available with floor assemblies similar to the "E"
Series, or can be shipped without floors to attach to your
concrete slab at site.
These storage facilities are generally clad with a 24 or 26
ga. vertical pre-finished steel siding but can be customized
to suit your needs. Interior liners if required, are a pre-finished
smooth steel panel. Overhead doors, man doors, and windows
are all available, as are electrical and heating, ventilation
and air conditioning packages.
Building applications include storage of general materials,
lawn maintenance equipment, some chemicals or pesticides (CPIC
approved designs), waste materials, drums and tools. The building
is available with a containment sump floor system for the
safe storage of waste or some chemicals.
Optional Features
- Custom designed floor systems
- Spill containment trays
- Pre-poured concrete floors
- Electrical and HVAC systems
- Plumbing and eyewash stations
- Fire suppression and warning systems
- Roll-up or man door
|
